An Overview of Automaitc Ultrasonic Welding Machine In The Field Of Electronics And Automotive Industries

Ultrasonic welding is a process by which the high-frequency vibrations of an ultrasound are applied to a work piece that needs to be welded together. Pressure is added to the parts and they are held together until they accomplish what is referred to as solid state welding. Normally, a frequency between 20 and 40 kHz must be present for this to work. Such type of welding is used for plastics and for joining two different materials.

The use of ultrasonic vibration eliminates the need for bolts, nails, braze, or adhesives to hold the materials together. Through the use of vibrations on the thermoplastics, the plastic melts because it absorbs the energy of the vibration that is drawn across the joint to be welded. For metals, ultrasonic welding takes place when the material is passed through friction welding.

The vibrations produced by an ultrasonic welding machine are generated by a welding horn and they soften the thermoplastic material along the connecting line. The equipment used determines the strength of the weld, and this depends on how the equipment is designed, the type of materials that will be welded and their properties, and the design of the joint.

The time required for ultrasonic welding is very small, and for mass production, this type of welding works very effectively. This type of welding is used in the automotive industry for light bundles of things that need to be done and for the manufacture of electronic products, such as the casing of mobile phones.

Ultrasonic welding machine from Huizhou Shengyang industrial Co., Ltd is used to weld both soft plastics, hard plastics and some metals. Nowadays, the machines can even produce semicrystalline plastics. There are studies and tests that are currently being conducted to examine the modality of the process, as not everybody has an understanding of the power of this process. They examine areas of how the process parameters of something that will be welded will affect the quality of the weld.

The process had to be investigated because there was more demand for different types of plastics and for electronic parts that are best produced by this process. In many ways it is still a developing area.

Ultrasonic welding consists of a lot of factors. Some of these factors include the following:

• It requires a press that can hold two different parts that are pressurized.
• An anvil to put the parts in place to pick up the vibration of increased frequency needed to hit the parts.
• Something called ultrasonic stack and has a transducer that holds the horn that needs to be tuned to the specific frequency.
• An electronic ultrasonic generator that can provide a higher power
• AC signal that can match the frequency that corresponds to the resonance of the stack.
• A controller that can control the movement of the press and how it delivers the ultrasound energy.

Ultrasonic welding can be found in many different fields outside the field of electronics and automotive industries. This process is also used in the electrical, computer, aerospace, packaging and medical industries

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Contact:
Person: James Yuan
Company: Huizhou Shengyang Industrial Co., Ltd
Add:  5th Floor,D Building,Jintaiyang Industrial Zone,Xingye Road,Zhongkai District,Huizhou,Guangdong,China
Tel: 86-752-6682869
Mobile:+86-13352636504
Email: info@automaticchina.com
Site:https://www.automaticchina.com/product-category/ultrasonic-welding-machine/

Article Original From:https://www.automaticchina.com/an-overview-of-automaitc-ultrasonic-welding-machine-in-the-field-of-electronics-and-automotive-industries/